Manual

Maintenance
2206.01 GB
9. Hold slide and allow it to glide forward.
10.Press decocking lever 38 down (Not
applicable to DAO pistols).
Note:
The pistol is unloaded and decocked.
8.4 Verification of functions
Note:
• Verification of functions must be conducted on
the assembled pistol:
– to identify causes of malfunction,
– after completion of repairs,
– and after each cleaning and assembly of
the pistol.
Procedure:
1. Make sure that the magazine is removed and
the pistol unloaded (see Section 5.8).
2. Check the elasticity of the recoil spring 3 and
the smoothness of the slide 4 (no jamming).
– Draw back slide to the stop and allow it to fly
forward.
– Check that slide is impelled forward with
sufficient energy and that it engages.
– Repeat the verification test.
3. Check the double-action trigger (DA).
– With hammer 29C decocked, pull trigger
19 through.
– Check that hammer cocks and that at the
end of trigger travel, it strikes firmly forward
and comes to rest in the safety intercept
notch.
4. Check trigger travel and trigger interruption.
– With hammer 29/29C decocked and trigger
pulled through, draw back slide to the stop
and release it.
– Check that hammer 29 is restrained in its
cocked position
(trigger remains pulled through)
(Not applicable to DAO pistols).
5. Check simple trigger function (SA).
– Release trigger.
– Check that trigger bar 22 reengages and
whether hammer 29 drops when the trigger
is pulled again.