Manual

Maintenance
19 06.01GB
Note:
• This level of stripping is sufficient to allow a
thorough cleaning after shooting.
• Further dismantling of the pistol may only be
carried out by qualified armourers and
gunsmiths.
8.2 Disassembly of the magazine
Procedure:
1. Thump up floorplate insert 47 through the
notch in the magazine floor plate 50 by means
of a pin punch (diameter 3 mm or 4 mm).
2. Push the magazine floor plate forward and pull
it off.
CAUTION!
Magazine spring is compressed
May lead to injuries and damage to the pistol
• Do not carry out any work on the pistol near
your face and hold magazine with the
magazine floor plate pointing downwards.
Fig. 16, Magazine
2.
50
1.