Manual

Maintenance
1806.01 GB
5. Hold slide 4 firmly and allow it to glide forward,
until the recoil spring 3 is decocked.
6. Now slip the complete assembly (slide 4,
barrel 1, recoil spring 3 and recoil spring
guide 2) forward and off the frame.
8.1.1 Stripping the slide
Procedure:
1. Push recoil spring guide 2 slightly forward,
raise it carefully and remove back the recoil
spring 3 with the recoil spring guide 2 from the
slide 4.
2. Remove barrel 1 from the slide 4.
Fig. 13
4
CAUTION!
Slide and recoil spring unit are only
connected loosely with each other
May lead to injuries and damage to the pistol
• The recoil spring 3 is cocked.
Uncontrolled removal of recoil spring guide 2
can cause it and the recoil spring 3 to jump
away. When stripping, control decompression
of the preloaded recoil spring 3 with your
hand.
Fig. 14
Fig. 15
2.
1
32
4
3.
2.
1.
14