Manual

Sight

15 06.01GB

7 Sight correction

7.1 Sight correction for windage

7.1.1 Shifting the rear sight

Note:

A special tool (see Section 7.4) is required for this

purpose.

Shifting the rear sight 6 to the right alters the point

of impact to the right.

7.1.2 Shifting the front sight

Note:

• A special tool (see Section 7.4) is required for

this purpose.

Shifting the front sight 5 to the left alters the point

of impact to the right.

7.2 Sight correction for elevation

Note:

Any corrections should first be carried out on the

rear sight 6.

7.2.1 Changing the rear sight

Changing the rear sight 6 for a deeper rear sight

alters the point of impact downwards.

7.2.2 Changing the front sight

Changing the front sight 5 for a higher front sight

alters the point of impact downwards.

CAUTION!

Pistol may be damaged

• Sight corrections should only be carried out

on an unloaded pistol by an armourer,

gunsmith or an expert. A special tool (see

Section 7.4) is required for this purpose. Any

corrections should first be carried out on the

rear sight 6.

Fig. 9, left: when point of impact is on the left;

right: when point of impact is low