Manual

Handling

1406.01 GB

3. Remove magazine catch stop 25.

4. Remove magazine catch 24 and insert it from

the desired operating side (see Fig. 7).

5. Push in the magazine catch stop from the

opposite side until the sear engages.

6.2 Changing the grip plate

6.2.1 Disassembly

Note:

Only remove the grip plate 45 if the weapon is

extremely dirty (water, sand, mud etc.) or the size

of the grip plate is to be changed.

Procedure:

1. In the magazine well/shaft, press down locking

catch 45a and pull grip plate 45 down.

6.2.2 Assembly

Procedure:

1. Push in grip plate from below until it engages.

Fig. 6, Releasing the magazine catch stop (illustration without trigger)

Fig. 7, Repositioning the magazine catch (illustration without trigger)

2425

WARNING!

Uncontrolled discharge of shot

May lead to death or severe injuries

• Prior to modifying the pistol, make sure that it

is unloaded and that the magazine is

removed

(see Section 5.8).

Fig. 8,

45a