Manual

Service and Repairs
2206.01 GB
Assembly/Malfunction Potential Cause Potential Remedy
Ammunition feed:
No round chambered.
Magazine not properly inserted,
deformed or dirty.
Pistol or rounds dirty or too
heavily greased.
Incorrect ammunition.
Pistol defective.
Insert magazine properly or
replace it.
Strip, clean and lubricate pistol
(see Section 8.1 to 8.4)
Replace ammunition.
Repair by manufacturer.
Slide:
Slide does not close properly.
Recoil insufficient because of
fouling.
Incorrect ammunition.
Pistol defective.
Strip, clean and lubricate pistol
(see Section 8.1 to 8.4).
Replace ammunition.
Repair by manufacturer.
Case ejection:
Spent case sticks in chamber or
jams in ejection port.
Incorrect or underloaded
ammunition.
Pistol defective.
Replace ammunition.
Repair by manufacturer.
Misfire:
Hammer strikes, but no
discharge.
Firing pin sticking in its guide.
Defective ammunition.
Pistol defective.
Strip, clean and lubricate pistol
(see Section 8.1 to 8.4) Have
pistol checked by armourer.
Manually cycle slide to chamber
new round.
Repair by manufacturer.