Manual
Maintenance Service and Repairs
21 06.01GB
8.6 Care of the pistol
9 Pistol service and repairs
9.1 Cause and correction of malfunctions
Pistol maintenance (cleaning and inspection)
according to the instructions can prevent
malfunctions.
Should, nevertheless, a malfunction occur during
shooting, proceed as follows:
Procedure:
1. Remove and safeguard the magazine.
2. Draw back slide 4 to the stop and arrest it in
the open position by thumbing up the slide
catch lever 17.
3. Verify (visually or with a tool) that there is no
bullet, round, case or foreign body in the
chamber or barrel bore (see Fig. 4).
If a projectile is lodged in the bore, strip the
pistol (see Section 8.1) and have the blockage
removed with a suitable tool by a qualified
gunsmith.
4. Remove all rounds, cases or foreign bodies.
Clean, lubricate and assemble the pistol (see
Section 8.3 and 8.4).
5. Have the pistol inspected by an armourer or
gunsmith.
CAUTION!
Inadequate care of the pistol
May lead to injuries and damage to the pistol
• Always keep your pistol in immaculate
condition and in good working order.
• Always clean your pistol after use.
• Never modify or repair parts of your pistol
yourself.
• Have your pistol checked once every 12
months by a qualified gunsmith or armourer
because defects, wear, corrosion, etc. are not
always visible from the outside.
• For repairs or service work, however, we
recommend that you return your pistol to the
manufacturer who always holds a full range
of spare parts in stock.
• If you order spare parts without returning the
pistol, you are responsible for ordering the
correct part and its correct fitting by a
qualified gunsmith or armourer.
The manufacturer and the importer cannot be
held liable for faults in the pistol or
malfunctions if the pistol has been modified
or non-original parts have been fitted or
repairs have been carried out by third parties.
WARNING!
Uncontrolled discharge of shot
May lead to death or severe injuries
• Hold pistol pointed in the firing direction (safe
direction) and keep your finger off trigger
19 while you carry out the operations
described in the following.