Manual

Maintenance
19 06.01GB
Insert barre l 1, with the cam facing downwards, in the slide 4.
4. Insert recoil spring guide 2 and recoil spring
3 into slide 4.
5.
6. Slip the complete assembly from the front onto
the frame 13 until it is flush at the rear.
7. Insert slide catch lever 17 horizontally from the
left, until it reaches the slide 4.
8. Clasp the frame with the right hand, draw back
slide with the left hand, until the notch 4b at
slide corresponds to the nose at the slide catch
lever. Push in the slide catch lever, until it
audibly engages in its rearmost position.
9. Hold slide and allow it to glide forward.
10.Press decocking lever 38 down (Not
applicable to DAO pistols).
Note:
The pistol is unloaded and decocked.
CAUTION!
Slide, recoil spring guide and recoil spring
are only connected loosely with each other
Pistol may be damaged
• When recoil spring 3 is inserted into slide 4, it
becomes preloaded.
If the recoil spring guide 2 is not carefully
installed in slide, it can fly out together with
the recoil spring and injure you or someone in
your vicinity.
Fig. 18
Fig. 19
1.
2.
14
2.
1.
324
Fig. 20
17 44b
13 38