Manual

Modification
13 06.01GB
5. Push in the magazine catch lock from the
opposite side until the sear engages.
6.2 Changing the grip plate
6.2.1 Disassembly
Note:
Only remove the grip plate 45 if the weapon is
extremely dirty (water, sand, mud etc.) or the size
of the grip plate is to be changed.
Procedure:
1. In the magazine well/shaft, press down locking
catch 45a and pull grip plate 45 down.
2.
6.2.2 Assembly
Procedure:
1. Push in grip plate from below until it engages.
Fig. 7, Repositioning the magazine catch (illustration without trigger)
WARNING!
Uncontrolled discharge of shot
May lead to death or severe injuries
• Prior to modifying the pistol, make sure that it
is unloaded and that the magazine is
removed
(see Section 5.8).
2425
Fig. 8
45a
45