OM-SIGPRO-USA 6-2005.qxp 6/1/2005 8:52 AM Page 1 sig pro TM Handling & Safety Instructions SP2022, SP2009, SP2340 WARNING Please read and understand this owner’s manual before taking your new SIGARMS pistol out of the box. It is vital to your safety and to the safety of others that you accurately follow the information contained in this m a n u a l , a s w e l l a s t h e information supplied by the ammunition manufacturer. If you have any questions, please call or write: SIGARMS Inc.
OM-SIGPRO-USA 6-2005.
OM-SIGPRO-USA 6-2005.qxp 6/1/2005 8:52 AM Page 3 Congratulations You are now the owner of one of the world's finest and most superbly engineered firearms. The SIG SAUER® sig pro™ Semiautomatic Pistol has been designed and crafted to meet the stringent requirements of law enforcement agencies and the military. Used with the proper ammunition and given reasonable maintenance, it will serve you dependably for many years.
OM-SIGPRO-USA 6-2005.qxp 6/1/2005 8:52 AM Page 4 Safety Information Before you take your new SIG SAUER pistol out of the box, please read the following information. It is vital to your safety and the safety of others. Firearms safety is your responsibility PISTOLS are classified as FIREARMS and are sold by us with the specific understanding that we are not responsible in any manner whatsoever for their safe handling or resale under local laws and regulations. SIGARMS Inc.
OM-SIGPRO-USA 6-2005.qxp 6/1/2005 8:52 AM Page 5 The Ten Commandments of Firearms Safety 1. ALWAYS treat every gun as if it were loaded. 2. ALWAYS keep the gun pointed in a safe direction. 3. ALWAYS keep your finger off the trigger until ready to shoot. 4. ALWAYS keep the gun unloaded until ready to use. 5. ALWAYS be sure the gun is safe to operate and the barrel is clear of any obstruction. 6. ALWAYS use the proper, factory-made ammunition for your particular gun. 7.
OM-SIGPRO-USA 6-2005.qxp 6/1/2005 8:52 AM Page 6 General Description The SIG SAUER® sig pro™ Semiautomatic Pistol has been designed specifically to meet the stringent requirements of military and law enforcement agencies. Manufactured by advanced state-of-the-art production processes, the SIG SAUER is a mechanically locked, short recoil operated pistol featuring an automatic firing pin safety lock, double-action/single-action trigger, decocking lever and external slide catch lever.
OM-SIGPRO-USA 6-2005.qxp 6/1/2005 8:52 AM Page 7 Ammunition Your SIG SAUER pistol will function effectively and safely with a wide variety of commercial and military-standard ammunition. Here are some suggestions that will help you keep your pistol free from ammunition-related problems: WARNING Using the wrong ammunition could result in serious injury or death. Catastrophic damage could occur. 1. Use only ammunition of the caliber for which your pistol is chambered.
OM-SIGPRO-USA 6-2005.qxp 6/1/2005 8:53 AM Page 8 Firearms Handling You have the pistol and ammunition, and you've read and understood all the safety instructions. You know about decocking the pistol by using the decocking lever (which doesn't apply if you have the DAO). Now, you're ready to use the pistol. Removing the magazine Remove the magazine by pressing the magazine catch. Retracting the slide Draw back the slide (4), and engage it by pushing up the slide catch lever (17).
OM-SIGPRO-USA 6-2005.qxp 6/1/2005 8:53 AM Page 9 Unloading the pistol Point the pistol in a safe direction, keep your finger off the trigger and remove the magazine. Pull back the slide (4) and lock it with the slide catch lever (17). Make sure the last round in the chamber has been extracted and ejected. Visually and physically check the chamber and the magazine well to make sure the pistol has been unloaded. Release the slide on an empty chamber. Depress the decocking lever*.
OM-SIGPRO-USA 6-2005.
OM-SIGPRO-USA 6-2005.qxp 6/1/2005 8:53 AM Page 11 Field Stripping Before you take the pistol apart, make sure it's unloaded. This is essential for your safety and the safety of others. Field strip the pistol as follows: Figure A Press the magazine catch. Remove the magazine. Figure B Pull back the slide (4) as far as it will go and hold it in the open position by pushing up the slide catch lever (17) with your thumb.
OM-SIGPRO-USA 6-2005.qxp 6/1/2005 8:53 AM Page 12 Figure C Take frame and slide in your right hand. Pull slide (4) back slightly to release slide catch lever (17). Allow slide to move forward slightly (about 1/8”) until the slide recess notch lines up with the tab on the slide catch lever (4b). Using your left hand, press on the slide catch lever shaft from the right side of the pistol and remove the slide catch lever from the left side of the pistol.
OM-SIGPRO-USA 6-2005.qxp 6/1/2005 8:54 AM Page 13 Figure E Push the recoil spring guide (2) carefully forward and to one side or lift off and remove recoil spring (3) and recoil spring guide (2) from slide (4). Recoil spring is under tension - use care to control spring during removal! Figure F Remove the barrel (1) from the slide (4). Figure G Grip removal - press retaining lug (45a) to remove grip plate (45).
OM-SIGPRO-USA 6-2005.qxp 6/1/2005 8:54 AM Page 14 User Disassembly (Field Stripping) The field stripped pistol is shown in Figure H below. This level of disassembly is qute sufficient to allow for cleaning & lubrication after shooting. Further disassembly should only be done by qualified gunsmiths and armorers. Figure H WARNING DO NOT ATTEMPT TO DISASSEMBLE YOUR PISTOL BEYOND THE POINT EXPLAINED IN THIS MANUAL.
OM-SIGPRO-USA 6-2005.qxp 6/1/2005 8:54 AM Page 15 Assembling the pistol To reassemble the pistol after cleaning, simply reverse the disassembly steps. Check that there is no foreign matter inside the pistol. Push the grip plate back on frame from below until the grip plate retaining notch snaps into place. With the slide upside down (sights down), place the barrel (1) in the slide (4). Place the recoil spring (3) back on the recoil spring guide (2).
OM-SIGPRO-USA 6-2005.qxp 6/1/2005 8:54 AM Page 16 Caring for your Pistol WARNING BEFORE PERFORMING ANY CLEANING OR MAINTENANCE, MAKE SURE THE PISTOL IS COMPLETELY UNLOADED. THIS INCLUDES THE MAGAZINE AND CHAMBER. Follow these instructions and your SIG SAUER pistol will remain in excellent condition even after years of hard service. NOTE: Your SIG SAUER pistol comes from the factory with a light coating of protective grease and oils.
OM-SIGPRO-USA 6-2005.qxp 6/1/2005 8:54 AM Page 17 Transport and Storage When transporting your pistol, keep it unloaded for your safety and for the safety of others. Know and comply with all laws governing the transport of firearms in your locality. When storing your pistol, keep it unloaded and separated from ammunition, under lock and key and out of the reach of children and other inexperienced or unauthorized persons. Returning your Firearm When you return a pistol to the SIGARMS Inc.
OM-SIGPRO-USA 6-2005.qxp 6/1/2005 8:54 AM Page 18 Sights The SIG SAUER pistol is equipped with drift adjustable fixed sights which have proven their worth under severe conditions. The sights consist of a rear sight and a front sight blade, designed and dimensioned to ensure rapid target acquisition even when visibility is poor. You can adjust the sights as follows: Windage (left/right): Change windage by moving the rear sight either to the left or right in its dovetail.
OM-SIGPRO-USA 6-2005.qxp 6/1/2005 8:54 AM Page 19 Parts Before you order any parts, please be advised that while most gunsmiths and armorers are perfectly capable of repairing your firearm, we can't vouch for any individual's skill or workmanship. Remember, unauthorized adjustments or parts replacement can void your service policy. Your SIG SAUER pistol is a precision instrument and some replacement parts may require a trained gunsmith or armorer to ensure proper operation.
OM-SIGPRO-USA 6-2005.qxp 6/1/2005 8:54 AM Page 20 Warranty Statement Based on Magnuson-Moss Warranty Act, SIGARMS Inc. offers no express warranty on their product line. However, SIGARMS Inc. recognizes its obligations concerning service to owners of SIGARMS products. SIGARMS Inc. stands behind its products and will continue to provide service to their product line as they have over the years. SIGARMS Inc.
OM-SIGPRO-USA 6-2005.qxp 6/1/2005 8:54 AM Page 21 Specifications - sig pro SP2022, SP2009 & SP2340 Mechanically-Locked, Recoil-Operated, Semiautomatic Pistol Trigger: Double-Action/Single-Action or Double-Action Only 4 Point Safety System: 1. Patented automatic firing-pin lock 2. Decocking Lever (DA/SA Only) 3. Safety Intercept Notch 4. Disconnector Caliber SP2022 & SP2022 & SP2022 & SP2009 SP2340 SP2340 9mm Luger .357 SIG .40 S&W Length, overall 7.36" 7.36" 7.36" Height, overall 5.
OM-SIGPRO-USA 6-2005.
7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29, 29 C 30 31 32 33 Item Designation Slide catch lever Slide catch lever spring Trigger Trigger spring Trigger pivot Trigger bar Magazine catch spring Magazine catch Magazine catch lock Hammer Box Drive lever Reset spring Hammer Safety lever Hammer pivot pin Hammer strut Main spring 23 NOTE: Items 27-40 are integral to Part 26 (Hammer Box) and are not available individually.
OM-SIGPRO-USA 6-2005.qxp 6/1/2005 8:55 AM Page 24 Be aware of those around you. If their actions are not in keeping with safe gun handling procedures, TELL THEM. IMPORTANT Do not discard. Keep this manual with your firearm. Upon change of ownership, transfer this manual with the firearm. SIGARMS Inc. 18 Industrial Drive Exeter, NH 03833 (603) 772-2302 www.sigarms.com SIG SAUER ®, SIG ®, sig pro™ and SIGLITE ® are registered trademarks of SIGARMS Inc.
