Manual

– 28 –
sig pro™
Function
Fig. 23, Case being ejected
8.4.2 Function sequence at
case ejection and
hammer cocking
Sear spring presses sear
36 and safety lever 30 to
their initial positions.
Empty case H is extracted
by extractor claw 10 and,
upon striking the ejector A,
is ejected.
As slide 4 recoils up to its
stop, it cocks hammer 29
and is then caught in the
SA notch 29a by sear 36.*
Slide 4 is propelled
forward through pressure
of the cocked recoil spring
3 and the next round is fed
(see Sect. 8.1.2). Barrel 1
locks up with slide 4 again.
The pistol is ready to fire.
Hammer 29 is cocked.*
* Not applicable to DAO
pistols.
SIGARMS SIGPRO OM 6/6/01 3:33 PM Page 28