Manual

– 27 –
sig pro™
Safety in the case of
incompletely closed slide
position
If slide 4 is not in its fully
locked final position, the reg-
ister between safety lever 30
and safety lock 9 is
cancelled. Also, trigger bar
22 is depressed by slide 4,
thereby interrupting the
remaining trigger functions.
Fig. 22, Barrel is tilted down and arrested
Function
8.4 Function sequence at
case ejection and
automatic reloading
8.4.1 Unlocking
Blowback reaction gener-
ated at discharge thrusts
slide 4 to the rear.
This separates safety lever
30 and safety lock 9. Firing
pin lock is effective again.
Slide 4 depresses trigger
bar 22, thereby discon-
necting trigger bar 22
from safety lever 30.
The barrel 1 must be
swung downwards to
release by means of the
control cam S in
conjunction with the slide
catch lever pivot 17.
SIGARMS SIGPRO OM 6/6/01 3:33 PM Page 27