Manual

– 20 –
sig pro™
Maintenance
Check smooth insertion of magazine into frame 13.
Check magazine catch 24 for clean engagement and
release.
9. Inspect external appearance of the pistol.
Check front sight 5, rear sight 6, grip plate 4 5 for damage
and dirt .
Check that front sight 5, rear sight 6 and grip plate 45
are firmly secured.
10. Verification of numbered components.
Check that serial numbers of barrel 1, slide 4 and frame
13 correspond.
7.5 Care of the pistol
Always keep your pistol in immaculate condition and in
good working order.
Always clean your pistol after use.
Never modify or repair parts of your pistol yourself.
Have your pistol checked once every 12 months by a
qualified gunsmith or armourer because defects, wear,
corrosion, etc. are not always visible from the outside.
For repairs or service work, however, we recommend that
you return your pistol to the manufacturer who always holds
a full range of replacement parts in stock.
If you order spare parts without returning the pistol, you are
responsible for ordering the correct part and its correct
fitting by a qualified gunsmith or armourer.
The manufacturer and importer cannot be held liable for
faults in the pistol or malfunctions if the pistol has been
modified or non-original parts have been fitted by third
parties.
SIGARMS SIGPRO OM 6/6/01 3:33 PM Page 20