Manual

– 14 –
sig pro™
Maintenance
5. Follow the slide 4 forwards with your hand until the recoil
spring 3 is released.
6. Now slip the complete assembly (slide 4, barrel 1, recoil
spring 3 and recoil spring guide 2) forward and off the
frame 15.
Recoil spring 3 is compressed. Uncontrolled removal of
recoil spring guide 2 can cause it and the spring to jump
away. When stripping, control decompression of the pre-
loaded recoil spring 3 with your hand.
Procedure
7. Push the recoil spring guide 2 c a refully forw a rds and to one
side or lift off and remove the recoil spring 3 with the re c o i l
spring guide 2 f rom the slide 4 (Fig. 11).
Fig. 11
Fig. 10
SIGARMS SIGPRO OM 6/6/01 3:33 PM Page 14