Manual
– 13 –
sig pro™
7 Maintenance of the Pistol
The magazine must be removed from the pistol.
Before stripping your pistol for cleaning, ensure once again
that it is unloaded (see Sect. 5.8).
7.1 Stripping the pistol
1. Unload the pistol (see Sect. 5.8).
2. Draw back slide 4 to the stop and arrest it in the open
position by thumbing up slide catch lever 17 (Fig. 8).
3. Check that no round is chambered (see Fig. 3, page 10).
4. Take the frame and slide in your right hand. Pull the slide 4
back slightly to release the slide catch lever 17. Then allow
the slide 4 to move forwards by about 3 mm until the recess
4b on the slide 4 rests with its tip against the slide catch
lever 17. Press the slide catch lever 17 in from the right and
remove from the left (Fig. 9).
Maintenance
Fig. 8
Fig. 9
SIGARMS SIGPRO OM 6/6/01 3:33 PM Page 13