Manual

– 11 –
sig pro™
6 Sight Correction
Any adjustment to sights should only be done on an
unloaded pistol, by an armourer, gunsmith or other qualified
person. Special tools (see Sect. 6.4) are required for this
task. Corrections should first be made to rear sight 6.
6.1 Sight correction for windage
Shifting the rear sight 6
Shifting the rear sight 6 by
0.02” to the right alters the
point of impact by 3” to the
right at 25 yard range.
Shifting the front sight 5
Shifting the front sight 5 by
0.02” to the left alters the
point of impact by 3” to the
right at 25 yard range.
SIGARMS Inc, has available a
Combination Sight Pusher
Tool which makes it easier to
adjust sights.
6.2 Sight correction for elevation
Changing the rear sight 6
Changing the rear sight 6 for
a lower one (one rear sight
increment) alters the point of
impact by 2” lower at
25 yard range.
Changing the front sight 5
Changing the front sight 5 for
a higher one (one front sight
increment) alters the point of
impact by 1” lower at
25 yard range.
Sights
Fig. 4,
point of impact left
Fig. 5,
point of impact high
SIGARMS SIGPRO OM 6/6/01 3:33 PM Page 11