Manual

– 10 –
1
sig pro™
4. Draw back slide 4 to the stop and thumb up slide catch
lever 17. The round will be ejected and slide 4 caught in its
open position.
5. Check visually, and manually with a tool, that the round was
ejected and that no other round is chambered (Fig. 3).
6. Actuate slide catch lever 17. Slide 4 will be impelled
forward.
7. Thumb down decocking lever 38. (Not applicable to DAO
pistols.)
8. Empty magazine.
9. Pick up and clean ejected round.
The pistol is unloaded and decocked. It must be cleaned after
every shooting session (see Sect. 7).
5.8.2 Unloading the pistol, magazine empty, slide open
The pistol must not be put down and out of your hand until
the magazine is removed and the pistol is unloaded.
Handling the Pistol
Procedure
1. Keep the muzzle of the pistol pointed in a safe direction.
2. Actuate magazine catch 24 and remove the magazine
(see Fig. 2, page 9).
3. Check that no round is chambered (visually and manually
with an aid) (Fig. 3).
4. Actuate slide catch lever 17. Slide 4 will be impelled
forward.
5. Thumb down decocking lever 38. (Not applicable to DAO
pistols.)
The pistol is unloaded and decocked.
Fig. 3
SIGARMS SIGPRO OM 6/6/01 3:33 PM Page 10