Manual

sig pro™
5.7 Reloading during shooting
The slide is caught in the open position.
Never let the pistol out of your hands.
Keep the pistol pointed at the safe target.
Procedure
1. Remove the empty magazine.
2. Insert full magazine and ensure that it engages.
3. Thumb down slide catch lever 17 or draw back slide 4 to
the stop and allow it to fly forward (see Sect. 5.5).
The pistol is loaded and ready to fire.
The pistol can also be decocked with decocking lever 38.
(Not applicable to DAO pistols.)
The pistol is now loaded, decocked and ready to fire.
5.8 Unloading the pistol
5.8.1 Unloading the pistol, magazine not empty
Never let the pistol out of your hands before it is unloaded.
The pistol is loaded, a round is located in the chamber of
the barrel.
Execute the unloading cycle with only two fingers from the
rear.
Never place your hand over the ejection port of the slide.
Procedure
1. Keep the muzzle of the pistol pointed in a safe direction.
2. On Double Action/Single Action pistols, actuate decocking
lever 38; hammer 29 will catch in the hammer safety notch.
With Double Action Only (DAO) pistols, hammer 29 C
automatically registers in the hammer safety notch.
3. Actuate magazine catch 24 and remove the magazine
(Fig. 2).
Handling the Pistol
– 9 –
Fig. 2
SIGARMS SIGPRO OM 6/6/01 3:33 PM Page 9