Owner manual

www.sigsauer.com

6.2 Function Check

Each time the weapon is stripped, verify its functions as follows:

Sequence of Procedure

1. Unload in accordance with section 4.0.

2. Remove magazine.

3. Ensure that charging handle is forward and bolt is closed.

4. Functions:

a. With safety lever on “S” execute loading cycle, pull the trigger. • Hammer must not drop, the trigger must be blocked.

b. With safety lever on “F”, pull the trigger and hold it back. • Hammer must drop.

With the trigger held down, cycle the weapon once. • Hammer must not drop.

Release the trigger and pull it again. • Hammer must drop.

NOTE: Steps c, d and e apply only to Select-Fire rifles. For Semi-Auto proceed to Step 6.