Owner manual

www.sigsauer.com

TO DISASSEMBLE

6.0 Field Strip Disassembly

1. Unload rifle (see section 5.0) – visually and physically check to ensure

the rifle is clear of all ammunition;

2. Ensure the bolt is forward;

3. Retract the takedown pin (rear pin) – this pin is captured and does

not fully remove;

4. Retract the pivot pin (front pin). This pin is captured and does not

fully remove.

5. Separate the trigger casing from the receiver;

STEP 3

STEP 4

TAKEDOWN

PIVOT PIN