Manual

62
www.sigsauer.com
TO CLEAR A MALFUNCTION (“JAM”)
6.0 Procedures In Case Of Malfunction
Should the rifle fail to fire, perform the following actions:
• Cycle the bolt; and
• Continue firing.
If the rifle does not fire after cycling the bolt:
• Insert a fresh magazine;
• Cycle the bolt; and
• Continue firing.
If the rifle still does not fire:
• Put safety lever in the “S” (SAFE) position;
• Remove magazine;
• Lock the bolt to the rear;
• Ensure the chamber is clear of all ammunition and foreign matter (visual & physical check);
• Turn gas valve on Position 2 when weapon is heavily fouled;
• Insert fresh magazine;
• Release bolt; and
• Place safety lever in the “F” (FIRE) position, continue firing.
12SIG599_SIG556MiniManual1511980Rev02.indd 62 9/12/12 12:40 PM