Instruction Manual

www.sigsauer.com

when it counts

™

To Unload Magazine and Rifle

5.0. Unloading

1. Ensure the safety lever is in the “S” (SAFE) position;

2. Remove magazine by depressing the magazine catch;

3. Pull the charging handle fully to the rear and lock bolt open using the bolt stop lever (see

section 3.5 item 2);

Step 1

Step 3

Step 2

4. Verify the chamber is empty, both visually and physically;

5. Allow the bolt to close only on an empty chamber.

Step 4

• Always make sure the muzzle is pointed in a safe direction!

• Remember to clear the chamber after the magazine has been removed.

• Never assume that any gun is unloaded until you have personally checked it, visually and

physically!

• After every shooting practice, make a final check to be certain the firearm is unloaded

before leaving the range.