User guide

www.sigsauer.com

TO CLEAR A MALFUNCTION (“JAM”)

6.0 Procedures In Case Of Malfunction

Should the rifle fail to fire, perform the following actions:

• Cycle the bolt; and

• Continue firing.

If the rifle does not fire after cycling the bolt:

• Insert a fresh magazine;

• Cycle the bolt; and

• Continue firing.

If the rifle still does not fire:

• Put safety lever in the “S” (SAFE) position;

• Remove magazine;

• Lock the bolt to the rear;

• Ensure the chamber is clear of all ammunition and foreign matter (visual & physical check);

• Turn gas valve on Position 2 when weapon is heavily fouled;

• Insert fresh magazine;

• Release bolt; and

• Place safety lever in the “F” (FIRE) position, continue firing.

12SIG541_SIG551_A1MiniManual_Rev1.indd 62 2/17/12 2:48 PM