Manual

16
Cleaning and Lubrication (continued)
Bolt and internal metal surfaces:
1. Use a small nylon bristle brush and soft clean cloth to thoroughly clean these
areas. Lightly lubricate the bolt and internal metal surfaces before reassembling
the rifle.
External metal surfaces:
1. Lightly lubricate all external metal surfaces before reassembling the rifle.
Wipe all external metal surfaces to remove any moisture or finger marks.
Stock:
1. Both the synthetic or wood stock on your SHR 970 rifle requires little or no
maintenance. Occasional cleaning with a damp cloth will restore your stock to
like-new appearance.
WARNING
Do not store ammunition with oils or cleaning chemicals.
WARNING
You must monitor the rifle’s performance. If the recoil seems too
weak, do not load another round. Completely unload the rifle and
check for a barrel obstruction. Examine the cartridge casing for
damage such as a splits or bulges. If these conditions exist promptly
return the rifle to SIGARMS for service.
Repair and Servicing
Although your SIGARMS SHR 970 has been precision manufactured and
assembled from the highest quality materials, there is always the possibility of
damage or the need for servicing and/or parts replacement. If you suspect your
rifle might be damaged, or if you ever experience any malfunction or notice
any looseness in the action of your rifle, stop using it immediately. Return it
to SIGARMS for inspection and any necessary repair.