Manual

10
Loading the Magazine and Rifle
Loading the magazine:
1. Make sure you check the bore for any obstructions before loading the rifle.
Obstructions could be anything from a forgotten cleaning patch to excess oil
or grease. Make sure the barrel is clean and ready to fire, if it is not, injuries
could occur to yourself or those nearby.
2. Load the correct caliber cartridges, as engraved on the side of the barrel, into
the magazine by pressing one cartridge at a time into the magazine until it is
retained firmly by the magazine lips.
3. Push the cartridges to the rear, making sure the base of each cartridge is located
against the rear wall of the magazine. The magazine capacity is four (4) rounds.
Assembling the bolt (continued)
4. Holding the rifle securely, with the
muzzle pointed in a safe direction,
insert the bolt with the handle
pointing straight up from the stock
(12:00 o’clock position) and gently
push the bolt into the receiver until
it is past the bolt stop/release
mechanism located on the left hand
side of the rifle (See Figure 2A).
Push the bolt fully forward and
rotate the bolt handle downward to
check engagement of the bolt.
This completes bolt installation
(See Figure 2B).
Figure 2A
Figure 2B