Manual

9
Assembling the bolt:
The bolt is shipped in the case with
your rifle but is not installed due to
shipping regulations.
1. Remove any packaging material
that may be on the bolt.
2. Move the safety to the center posi-
tion.
3. Remove the magazine by firmly
pressing forward on the magazine
catch located in front of the
trigger guard (See Figure 1).
Continued on next page
Assembly Instructions
WARNING
REMEMBER that the safety mechanism is not a substitute for safe
gun handling. Always keep the gun pointed in a safe direction even
when the safety is engaged, to avoid serious injury to you or others.
WARNING
Be sure to wear eye protection prior to performing any assembly
or disassembly.
WARNING
If the safety mechanism becomes loose or difficult to operate, unload
the firearm and return it to SIGARMS immediately for service.
Figure 1