Manual

SIG 556 Operators Manual 50 P/N 1511203 VER 12.7.2
6. Apply a light coating of high quality firearms lubricant or
grease to exposed metal surfaces to enhance corrosion protection;
7. Reassemble the rifle per section 7.1; and
8. Perform a function check in accordance with section 7.2.
SERVICE AND PARTS POLICY
Parts Policy
Our Service Department maintains a full complement of replace-
ment parts. Even though most gunsmiths have the knowledge,
training, and the ability to make necessary repairs to your firearm,
the skill and workmanship of any particular gunsmith is totally
beyond our control.
Should your firearm ever require service, we strongly recommend
that you return it to SIGARMS Inc. (see page 52). A firearm is a
precision instrument and some replacement parts will require
individual fitting to ensure correct operation. A wrong part,
improper fitting, or incorrect mechanical adjustment may result in
an unsafe condition or dangerous malfunction, damage to the
firearm, or cause possible serious injury to the shooter or others.
IF ANY PART IS ORDERED WITHOUT RETURNING THE
FIREARM TO SIGARMS, INC., the customer bears full
responsibility for ensuring that the part supplied is correct for
their particular firearm and is properly installed and fitted by a
qualified gunsmith.
SIGARMS, INC. CANNOT BE RESPONSIBLE FOR THE
FUNCTIONING OF ANY FIREARM IN WHICH
REPLACEMENT PARTS ARE INSTALLED BY OTHERS.
SIG556 OM 12.06.qxp 1/8/2007 2:26 PM Page 50