Manual

www.sigsauer.com

WARNING – SIGHT ADJUSTMENT

Sight corrections should ONLY be

performed on an unloaded firearm.

Manipulating the sights on a loaded

firearm could result in unintentional

discharge, causing injury or death.

Visually and physically confirm the

pistol is unloaded before making sight

adjustments.

DO NOT ADJUST THE SIGHTS ON

A LOADED FIREARM

10.3 Elevation (Up/Down) Adjustment

There are different height combinations available for the front and rear sights.

The sights are numbered according to their height. You can change elevation by

changing either the rear or front sight. It’s easier if you change the rear sight

first. There are six rear sight heights available. Each rear sight change will move

the impact of the bullet approximately 2” at 25 yards. There are five front sight

heights available. Each front sight change will move the impact of the bullet ap-

proximately 1” at 25 yards.

When changing sights, remember this rule: NUMBERS UP, GROUPS UP; NUMBERS

DOWN, GROUPS DOWN. This is true for both front & rear sights.