Manual

Assemble the pistol as follows:

• Slip the the recoil spring (12) over the barrel (11), narrower end first.

• Swing the take-down lever (20) downward to a vertical position.

• Guide slide (1) over the recoil spring, and while slightly raising the rear end

of the slide, pull it over the barrel as far as it will go.

• Push the rear end of the slide down toward the grip (40), and allow the slide

to move forward.

• Turn take-down lever clockwise and upward to a horizontal position.

• Decock the hammer with decocking lever (24) (DA/SA ONLY)

• Insert the magazine.

Figure D