Manual
Maintenance
1806.01 GB
7.4 Assembling the pistol
Procedure:
1. Check that there is no foreign matter inside the
pistol.
2. Check that the serial number of the barrel,
slide and frame tally.
3. Insert barrel 1 into slide 4.
Insert barre l 1, with the cam facing downwards, in the slide 4.
4. Slip the narrower end of recoil spring 3 over
the recoil spring guide 2.
5. Thumb down takedown lever 16.
6. Insert recoil spring guide 2 and recoil spring 3
into slide 4.
7. From the front, slip assembled slide onto the
guide rails of frame 15.
8. Draw back slide 4 to the rear stop. Thumb up
slide catch lever 18 to arrest slide 4 in its open
position.
9. Flip up takedown lever 16 counter-clockwise.
10.Actuate slide catch lever 18; slide 4 is impelled
forwards.
11.Thumb down decocking lever 40. (Not
applicable for DAO/DAK pistols.)
Note:
• The pistol is unloaded and decocked.
Fig. 14
CAUTION!
Slide, recoil spring guide and recoil spring
are only connected loosely with each other
May lead to injuries and damage to the pistol
• When recoil spring 3 is inserted into slide 4, it
becomes preloaded.
If the recoil spring guide 2 is not carefully
installed in slide, it can fly out together with
the recoil spring and injure you or someone in
your vicinity.
Fig. 15
1.
2.
1
1a.
4
1b.
2
3
Fig. 16
16
18
4