Manual

Handling
807.02 GB
5.5 Loading the pistol (ready to fire)
Procedure:
1. Point the pistol in a safe direction.
2. Insert full magazine and check that it engages.
3. Draw back slide 24 to the stop and allow it to
fly forward.
– The pistol is loaded and ready to fire.
Checking the load state
The presence of a round in the barrel chamber is
indicated visibly and tangibly by extractor 29,
which is provided with a red marking, on the side
of the slide on the exterior (see Fig. 2).
WARNING!
Insufficient awareness of the dangers
May lead to death or severe injuries
• Never load or unload the pistol inside a
vehicle, inside a building or other confined
space (except in a designated firing range).
• Before loading, always wipe off any excess
grease and oil and check that there is no
obstruction in the bore of the barrel.
• Always keep the muzzle of the pistol pointed
in a safe direction.
• Do not place your finger on the trigger. Place
your finger outside of the trigger guard.
• Do not load the pistol by inserting the
magazine until immediately before shooting.
• Never rely on safety mechanisms. They are
never a substitute for careful and correct
handling of the pistol.
• Never let a loaded pistol out of your hands.
Fig. 2, Indication of load state
29