Manual

Maintenance
17 07.02GB
8.1.1 Stripping the slide
1. Push recoil spring guide 22 forward, raise it
carefully and remove the recoil spring 23 with
the recoil spring guide from the slide 24 (see
Fig. 14).
2. Remove barrel 21 from the slide 24 (see Fig.
15).
Note:
• This level of stripping is sufficient to allow a
thorough cleaning after shooting.
• Further dismantling of the pistol may only be
carried out by qualified armourers and
gunsmiths.
8.2 Disassembly of the magazine
Procedure:
1. Push in the locking cams of the magazine floor
plate 38 on both sides. Push magazine floor
plate forward and remove it downwards.
2. Remove magazine spring 39 and feeder 37,
see Fig. 20 on page 26.
Fig. 14
Fig. 15
2.
1.
23 2224
2.
1.
2124
CAUTION!
Magazine spring 39 is compressed
May lead to injuries and damage to the pistol
Do not carry out any work on the pistol near your
face and hold magazine with the magazine floor
plate pointing downwards.
Fig. 16, Magazine
1.
2.
38