Manual

Maintenance
15 06.01GB
7 Pistol maintenance
7.1 Stripping the pistol
Procedure:
1. Unload the pistol (see Section 5.8).
2. Draw back slide 4 to the stop and arrest it in
the open position by thumbing up the slide
catch lever 18.
3. Check that no round is chambered
(see Fig. 3).
4. Thumb down takedown lever 16 (see Fig. 3).
.
5. Draw back slide 4 slightly to disengage slide
catch lever 18.
6. Hold slide 4 firmly and allow it to glide forward
(see Fig. 3).
7. Now slip the complete assembly (slide 4,
barrel 1, recoil spring 3 and recoil spring
guide 2) forward and off the frame.
7.1.1 Stripping the slide
WARNING!
Pistol is ready to fire
May lead to death or severe injuries
• The magazine must be removed from the
pistol.
• Before stripping your pistol for cleaning,
ensure once again that it is unloaded
(see Section 5.8).
• Do not grasp slide 4 with your fingers.
Fig. 7
Fig. 8
Fig. 9
CAUTION!
Slide and recoil spring unit are only
connected loosely with each other
May lead to injuries and damage to the pistol
• The recoil spring 3 is cocked.
Uncontrolled removal of recoil spring guide 2
can cause it and the recoil spring 3 to jump
away. When stripping, control decompression
of the preloaded recoil spring 3 with your
hand.
16
18
4