Manual

Handling
9 06.01GB
5.5 Loading the pistol (ready to fire)
Procedure:
1. Point the pistol in a safe direction.
2. Insert full magazine and check that it engages.
3. Draw back slide to the stop and allow it to fly
forward.
– The pistol is loaded and ready to fire by
means of Single Action trigger.
– The pistol can then be decocked with
decocking lever 40. Now the pistol is
loaded, decocked and ready to fire with the
double action trigger.
– The Double Action Only pistol (DAO) and
the Double Action Kellermann pistol (DAK)
is decocked and ready to fire.
Note:
• Double Action Only pistols (DAO)/ Double
Action Kellermann pistols (DAK) do not have a
decocking lever 40.
With each cocking or reloading, the hammer
29C/D is caught by the hammer safety
intercept notch.
WARNING!
Insufficient awareness of the dangers
May lead to death or severe injuries
• Never load or unload the pistol inside a
vehicle, inside a building or any other
confined space (except in a designated firing
range).
• Before loading, always wipe off any excess
grease and oil and check that there is no
obstruction in the bore of the barrel.
• Always keep the muzzle of the pistol pointed
in a safe direction.
• Do not place your finger on the trigger. Place
your finger outside of the trigger guard.
• Do not load the pistol by inserting the
magazine until immediately before shooting.
• Never pull the hammer back by hand to cock
it.
• Never rely on safety mechanisms. They are
never a substitute for careful and correct
handling of the pistol.
• Never let a loaded pistol out of your hands.