Manual

16
Sights
The SIG SAUER pistol is equipped with drift adjustable fixed sights which
have proven their worth under severe conditions. The sights consist of a rear
sight and a front sight blade, designed and dimensioned to ensure rapid target
acquisition even when visibility is poor. You can adjust the sights as follows:
Windage: Change windage by moving the rear sight either to the left or right
in its dovetail. When you do this, follow the rear sight rule: Move the rear
sight in the direction you want the group to go. Moving the rear sight 0.020"
in the dovetail changes the point of impact by approximately 3" at 25 yards.
(Note: SIGARMS has available a Combination Sight Pusher tool which makes
it easier to adjust and change sights.)
Elevation: There are different height combinations available for the front and
rear sights. The sights are numbered according to their height. You can change
elevation by changing either the rear or front sight. It's easier if you change the
rear sight first. Each rear sight change will move the impact of the bullet
approximately 2" at 25 yards. Each front sight change will move the impact of
the bullet approximately 1" at 25 yards.
Remember, a higher rear sight will raise the impact of the bullet; a higher front
sight will lower the impact of the bullet.
Sight Options
Front Sight Rear Sight
Number Height Number Height
05 6.01 mm 05 5.52 mm
06 5.88 mm 06 5.80 mm
07 5.74 mm 07 6.07 mm
08 5.60 mm 08 6.35 mm
09 5.46 mm 09 6.62 mm
10 6.90 mm