Manual

20
USA
21
Servicing Servicing
USA
Ammunition feed:
No round is fed in.
No round chambered.
Slide:
Slide does not close properly.
Case ejection:
Empty case remains in the chamber
or gets stuck in ejector port.
Misfiring:
Hammer hits; no discharge.
8.2 Safekeeping and storage of pistol
• Only store your pistol unloaded and cleaned.
• Keep your pistol separate from ammunition and locked
away. The pistol and ammunition must always be in a
place inaccessible to children and unauthorized per-
sons.
8.3 Shipping the pistol
• Familiarize yourself with all laws and regulations
governing shipping and transport of firearms.
1. Check pistol to ensure it is unloaded and decocked.
2. Pack the pistol well (if possible in the original packaging)
so that transport damages are prevented. In order to
ensure that it is not recognized as such during trans-
port, cover the original packaging with a second outer
layer.
Accessories should not be included in the package.
3. Enclose a letter with the following information:
• Your name
• Your address
• Your telephone number, at which you can be contacted
during the day
• A detailed description of the problems encountered or
the work that is to be carried out.
Warning
4. Send the pistol insured and carriage paid (parcels with
incorrect postage will not be accepted) to:
SIGARMS Inc.
Attn: Service Department
18 Industrial Drive
Exeter, NH 03833/USA
Phone [phone]
Fax [phone]
Before returning the firearm contact Customer Service at
[phone] for an RMA number. Clearly mark the
number on the outside of your package – this number
will assist us in tracking the status of your return.
Warranty Statement
Based on Magnuson-Moss Warranty Act, SIGARMS Inc.
offers no express warranty on their product line.
However, SIGARMS Inc. recognizes its obligations
concerning service to owners of SIGARMS products.
SIGARMS Inc. stand behind its products and will continue
to provide service to their product line as they have over
the years. SIGARMS Inc. products will be serviced for a
period of one year from date of retail purchase, for
defects in materials or workman ship, at no charge to the
purchaser.
Be sure to retain your sales slip as proof of purchase date
when making a claim.
Magazine is not inserted correctly,
deformed or dirty.
Pistol or rounds dirty or greased too
much.
Large (heavy) slide spring mounted
and standard ammunition used.
Pistol defective.
Recoil not sufficient due to dirt.
Underloaded ammunition.
Pistol defective.
Firing pin sticks in the
firing pin guide.
Ammunition fault.
Pistol defective.
Insert magazine correctly or
replace it.
Strip, clean and lubricate pistol,
clean or replace ammunition.
Small (light) slide spring mounted.
Repair by manufacturer.
Strip, clean and lubricate pistol.
Replace ammunition.
Repair by manufacturer.
Strip, clean and lubricate pistol.
Have pistol checked by armourer.
Load a new round with a manual
loading action.
Repair by manufacturer.
Part/fault Possible cause of fault/defect Possible fault/defect removal