Manual

Safety mechanisms Handling
8GB06.01
5.3 Drop safety
Safety lock is in front of the firing pin and prevents
the firing pin from hitting the round. Only when the
trigger pulls the recoil spring bar does the safety
lever push the safety lock up and release the firing
pin.
5.4 Magazine safety
Magazine safety prevents the trigger from being
pushed through. Only when the magazine is
pushed into the magazine well/shaft and is clicked
home is the safety disengaged and the trigger is
released.
6 Handling the pistol
6.1 General
The pistol is generally delivered preserved with a
thin, protective grease and oil coating and must be
stripped before being used for the first time,
protective oil or grease removed and lubricated
again. “First use“ (see section 9).
Procedure:
1. Strip pistol (see section 9.1).
2. Clean and relubricate pistol (see section 9.2).
3. Assemble pistol (see section 9.3).
6.2 Ammunition
Fig. 4, decocked
Fig. 5, secured
WARNING!
Inadmissible ammunition
Possibly death or serious injuries and
damage to the pistol
• For your pistol, use only commercial grade
ammunition in its original packing for which
corresponds with the calibre of the pistol. The
correct calibre is imprinted on the pistol .22
Long Rifle.
• Never use reloaded, “refurbished”, hand-
loaded, non-standard ammunition or
ammunition of a different calibre.
• Never use dirty, wet, corroded, bent,
damaged or oiled ammunition.
• Never leave the ammunition lying
unattended.