Manual

Maintenance
19 GB 06.01
9.3 Pistol assembly
Procedure:
1. Check there is no foreign matter inside the
pistol.
2. Slide recoil spring 3 onto the spring guide 2.
3. Insert spring guide with recoil spring into the
frame 15.
4. Slip slide over the spring guide and pull back
until the slide guide can click into the frame
guide.
5. Pull slide forward in the guide until the slide is
in the locked position.
6. Install the threaded cap of the Silencer version
(see chapter 7.2.2), resp. the counterweight of
the Sport version (see chapter 7.1.2).
7. Turn take down lever by 180° until it points
back.
Note:
The pistol is unloaded and decocked.
Fig. 18, Cleaning Sport version
Fig. 19, Cleaning Silencer version
4
1b
2
15
51
79
80
3a/b
43a/b
1c
2
5182
81
CAUTION!
Slide, recoil spring guide and recoil spring
are loosely connected
Possibly damage to the pistol and bodily
harm
• Careful handling of the slide and the parts
connected to the recoil spring.