Manual

Sight correction
16GB06.01
6. Place the screw 58 in the frame and tighten it.
7. Use screw 66 to fix the takedown lever 25 with
the frame.
8 Sight correction
8.1 Sight correction for windage
8.1.1 Rear sight adjustment
Turning the lateral adjusting screw clockwise one
full rotation moves the point of impact
approximately 8 cm to the left at a distance of 25
m.
Turning the lateral adjusting screw counter
clockwise one full rotation moves the point of
impact approximately 8 cm to the right at a
distance of 25 m.
8.2 Sight correction for elevation
Changing to the higher front sight lowers the
point of impact approximately 20 cm at 25 m.
Changing to the lower front sight raises the
point of impact approximately 20 cm at 25 m.
CAUTION!
Possibly damage to the pistol
• Any adjustment to sights should only be done
on an unloaded pistol, by an armourer,
gunsmith or other qualified person.
CAUTION!
Possibly damage to the pistol when turning
the adjusting screw clockwise
• Turn the adjusting screw clockwise only until
you notice a light resistance. Do not turn the
screw any further!
• The rear sight must not exceed the edge
shown in Fig. 12.
Fig. 11
Fig. 12
!
!