Owner's Manual

13.0 STORAGE
• Before storing the CO
2
airgun, make sure the safety is
“ACTIVATED”, the magazine is unloaded, and the CO
2
cylinder is
removed.
• CO
2
airguns should be stored in such a manner as to protect
against unauthorized use by children and others.
• These products are designed to look, handle and funcon like
rearms. These products should be stored in such a manner to
protect against the and subsequent misuse.
14.0 ROUTINE GENERAL MAINTENANCE
• Always visually inspect Airgun before use. Funcon check all
levers and buons, such as magazine catch, safety levers, slide
catch lever, etc., before use of Airgun.
• Be sure sights and/or opcs are not loose. If secondary sights/
opc are mounted, be sure to follow instrucons provided with
that product.
• DO NOT MODIFY OR ALTER YOUR AIRGUN. Modicaon of the
gun mechanism may cause a gun to malfuncon and tampering
with a gun may make it unsafe to use; ANY change in the
performance, indicates possible wear and such guns should be
inspected, replaced, or properly repaired. Repairs should only
be made by qualied personnel. For non-voidance of warranty,
replacements or returns are to be carried out and discussed with
Sig Sauer® customer service.
• If airgun is dropped, visually check to see that it works properly
before you use it again. If any quesonable changes, such as
lowered trigger force and/or shortened trigger travel occur, this
may indicate worn out or broken parts. Call SIG SAUER® customer
service at [phone] Ext. 1,for assistance before using your
airgun again.
14
M17 Operators Manual for Translation.indd 14 7/3/2018 10:01:37 AM