Owner's Manual
9.0 REMOVED JAMMED AMMUNITION-CONTINUED
Press barrel release buon to remove barrel. The recoil spring guide rod
assembly will now be free to remove. With .177 rod or similar size object,
push jammed pellets through barrel and out the muzzle end.
REASSEMBLE in reverse order by inserng recoil spring guide rod then
barrel. Slip slide over muzzle of barrel. Move the slide rearward slowly while
maintaining downward pressure unl the slide drops down into place, then
rotate takedown lever back into place allowing spring force to carry slide
forward. Do NOT force slide rearward quickly or with a large amount of
force or it will overshoot its locking window. If this occurs, li the slide up
and forward and try again with less force.
NEVER ATTEMPT TO FIRE THE AIRGUN IF YOU THINK THERE IS
AN OBSTRUCTION IN THE BARREL SUCH AS LODGED PELLET.
ALWAYS MAKE SURE THE SAFETY IS ACTIVATED AND THE CO
2
AIRGUN IS RELIEVED OF PRESSURE BEFORE CLEARING THE
OBSTRUCTION. ALWAYS DISCARD DEFECTIVE AMMUNITION.
10
WARNING
M17 Operators Manual for Translation.indd 10 7/3/2018 10:01:37 AM