Owner's Manual

62
63
sigsauer.com
Q: I’ve plugged the WindMETER into my smartphone jack and I still do not get a wind
reading.
A: On some versions of Android, your smartphone may not be able to provide enough current to the
WindMETER to obtain an accurate wind reading. In this case you may be better off downloading the
WeatherFlow wind meter app and using this app to obtain a wind reading. You will then need to
manually update the wind reading in the ENVIRONMENT page of your Sig Ballistic App. We apologize for
any inconvenience but due to the large variety of smartphones and different software loads we could not
guarantee functionality in every configuration.
If you continue to have trouble getting the WindMETER to accurately measure the wind speed it is
recommended that you remove the WindMETER and use an external wind meter (i.e. Kestrel) and
manually enter the wind speed and direction into the app or directly into the rangefinder.
Q: When in SCAN mode my rangefinder turns off after 20 seconds, is this normal?
A: Yes - the SCAN mode is limited to 20 seconds to remain eye safe in all conditions. You can reenter
SCAN mode by releasing and pressing the RANGE button again.