Owner's Manual

sigsauer.com

6. Target – Use the Target sub menu if you are shooting moving targets. Heading, Inclination and Latitude

all are pulled from the rangefinder. Target Speed and Target Direction are manual inputs. In the example

below the Heading is 215’, the target is at a decline of 16’, the Latitude is 40.0’ and the Target Speed has

been input as 10 mph moving Right to Left. Verify that your rangefinder is connected and then press the

SYNC button to synchronize your settings with your rangefinder.

7. Compass Calibration – While using

the KILO8K-ABS you may notice that

your compass heading may be off

while viewing the Target submenu.

Using a known compass while synced

with your KILO, check the Target menu

to determine if your compass heading

is accurate (i.e. by aiming the KILO due

north). If you determine there is a slight

calibration offset, you can recalibrate

your KILO by selecting Preferences

from the Home Screen. Scroll down

to Compass Calibration and press the

START button to begin recalibrating

your KILO to your local environment.

Your KILO must be turned on and

actively synced with your smartphone.

Follow the onscreen instructions.

Once recalibrated your KILO will return

to the ready to range screen.

For custom calibration, select the

Preferences from the Home Screen, then

select Compass Calibration and follow

the onscreen instructions