Owner's Manual

48
49
sigsauer.com
3. Heads Up Display – The HUD is configured to display real-time information from the paired rangefinder
when ranging. Range, holdover and environmental information from the rangefinder is relayed over
Bluetooth and displayed on the HUD. One of the most useful features is the remote RANGE button.
During an active ranging session you can fire your rangefinder remotely by using this onscreen button.
Note – ballistic holdover information will only be displayed if the rangefinder is set to LOS mode. If AMR is
selected then only the angle modified range will be displayed.
Range information in Y or M
Elevation and Wind Holdover
Muzzle Velocity
Temperature
Pressure
Density Altitude
Energy at Target
Velocity at Target
Connection Status
Remote Range
Button
Wind Speed
and Direction
When actively ranging targets while connected to your KILO, you can update the wind speed directly from
the HUD display screen. Press the round SYNC button in the upper right hand corner of the display to
re-sync your wind setting without having to return to the Environment submenu.