Owner's Manual

42
43
sigsauer.com
3. You have set your Wind Direction, Wind Speed Unit of Measure (UoM) and now need to set the Wind
Velocity. The default setting is 0. Your display should show “WS”, “M/H” or “M/S” and “0” will be flashing.
You can increment the wind velocity by 1 unit by pressing and releasing the RANGE button. If you press
and hold the RANGE button down you can increase the digits faster up to a maximum of 40. Once your
selection is set and flashing, press and release the MODE button to save your setting and index to
Holdover Unit of Measure.
WS /H
0
WS /H
25
4. You have set Wind Direction Heading, Wind Speed UoM and Wind Speed Velocity. You will now choose
your Holdover Unit of Measure. The default setting is “MOA” and will be flashing. You can toggle between
MOA and MIL pressing and releasing the RANGE button. Once your selection is set and flashing, press
and release the MODE button to save your setting and index to set the common settings such as Target
Mode, Display Brightness, Reticle Selection and other common features as described earlier in the
manual.
You have now installed your smartphone app, paired your phone with your rangefinder, created and
configured one or more ballistic profiles, selected a profile on the rangefinder, synchronized your profiles
with your rangefinder and configured all advanced settings. You can now use your rangefinder to
calculate wind and elevation holds in real time.