Owner's Manual

sigsauer.com

You will now see “WD” with “12:00” flashing. You can set your Wind Direction by pressing and releasing

the RANGE button. The direction will change by 1:00 increments and represents the direction that the

wind is coming from. Once set press the MODE button to save your wind direction and index to Wind

Speed Unit of Measure. Note – you can override this setting by using the Sig Ballistic App and adjusting

the heading on the app - press the SYNC button to override your settings on the rangefinder. Directions

for the app will be shown later in the manual.

12:00

3:00

2. You have set your Wind Direction and now need to choose a Wind Speed Unit of Measure. The default

setting is M/H (miles per hour or mph). Your display should show “WS” and “M/H” will be flashing. You

can switch between M/H and M/S (meters per second) by pressing and releasing the RANGE button. Once

your selection is flashing, press and release the MODE button to save your setting and index to Wind

Speed Velocity.

WS /H WS /S