Owner's Manual

sigsauer.com

6. The next step is to enable a synchronized profile on your rangefinder by turning the rangefinder on by

pressing and releasing the RANGE button. At the status display screen press and hold the MODE button

for at least 2 seconds. Once in programming mode release the MODE button and follow the flowchart

from page 13 by selecting LOS, advancing to Profile Selection (press and release the MODE button) and

selecting Pro 1 (or Pro 2, 3 or 4) by pressing and releasing the RANGE button. Once a Profile is selected

you can advance through the menu system to configure the other relevant settings such as Wind

Direction, Wind Speed Unit of Measure, Wind Velocity, Holdover value and the other common settings.

Pro I

ADVANCED BALLISTIC OPERATION – Configuring wind and elevation holdover

1. For this section you will want to have your rangefinder in Programming Mode. Press and release the

RANGE button to wake up the rangefinder. While looking at the status display on the rangefinder, press

and hold the MODE button for more than 2 seconds to enter programming mode – then release the

MODE button. Index through the menu system by pressing and releasing the MODE button – you will

select LOS, then one of the Profiles (i.e. Pro 1).

Pro I