Owner's Manual

sigsauer.com

5. Now that you have one or more profiles created, you need to select which profiles are to be

downloaded to your rangefinder. Press the grey circle next to the profile to select up to 4 profiles for

synchronizing with your rangefinder. In this example 2 out of 3 profiles are set for synchronization:

Make sure your rangefinder is active

or on by pressing and releasing the

RANGE button. You should see the word

“CONNECTED” on the app. Touch or

select the “SYNC” button in the upper

right hand side of the screen and watch

for the dialog box to show that the

app and rangefinder are syncing. Once

the dialog box disappears you have

now downloaded your profile(s) to the

rangefinder. You are now ready to use

your rangefinder to determine elevation

holds based on how you configured the

rangefinder. This section will help you set

your Wind Direction, Wind Speed Unit of

Measure, Wind Velocity if not using the

supplied WindMETER and the unit

of measure for Holdover (MIL or MOA).