Owner's Manual

sigsauer.com

9. Looking back to Step 2, if you selected LOS and pressed and released the MODE button, then the

rangefinder will index to Profile Selection. NoPro, Pro 1, Pro 2, Pro 3 or Pro 4 will be flashing. You can

toggle between profiles by pressing and releasing the RANGE button. Confirm and save your selection

by pressing and releasing the MODE button to index to the next programming mode. If you do not press

and release the MODE button the rangefinder will save your displayed setting and turn off. NoPro should

be selected if you DO NOT intend to use the onboard ballistic calculator. If you want to use the onboard

ballistic calculator in conjunction with the Sig Ballistic App you should follow the instructions shown later

in the manual. For this example, NoPro is selected and saved and the programming path is identical to

the AMR path shown above.

8. At this point you have selected AMR, set Target Mode, Display Brightness, selected an aiming reticle,

set the unit of measure and turned Bluetooth on or off. You can now turn Density Altitude ON or OFF.

DA is OFF by default and will be flashing. Turn ON or OFF by pressing and releasing the RANGE button

to toggle back and forth. Confirm and save your selection by pressing and releasing the MODE button to

index to the next programming mode. If you do not press and release the MODE button the rangefinder

will save your displayed setting and turn off.

DADA

OFF

Pro I

NoPro