Owner's Manual

sigsauer.com

7. At this point you have selected AMR, set Target Mode, Display Brightness, selected an aiming reticle

and set the unit of measure. You can now turn Bluetooth ON or OFF. Bluetooth is on by default and

will be flashing. Turn ON or OFF by pressing and releasing the RANGE button to toggle back and forth.

Confirm and save your selection by pressing and releasing the MODE button to index to the next

programming mode. If you do not press and release the MODE button the rangefinder will save your

displayed setting and turn off. If you are not using the Sig Ballistic App you should turn Bluetooth off to

reduce power consumption and extend the runtime of your rangefinder.

6. At this point you have selected AMR, set Target Mode, Display Brightness and selected an aiming

reticle. You will now choose a unit of measure – Yards or Meters. Y for yards is default and will be

flashing. Select a unit of measure by pressing and releasing the RANGE button to toggle back and

forth. Confirm and save your selection by pressing and releasing the MODE button to index to the next

programming mode. If you do not press and release the MODE button the rangefinder will save your

displayed setting and turn off.

OFF